2060 SERIES 120/277V LED

Pages 17
Views 11
of 17
All materials on our website are shared by users. If you have any questions about copyright issues, please report us to resolve them. We are always happy to assist you.
Description
LUMELEX 0 SERIES 0/V LED Elegant fixed downlight designed specifically for the most demanding architecture applications. Designed for an LED module up to Watts in three formats: Xicato XTM (1mm), Xicato
Transcript
LUMELEX 0 SERIES 0/V LED Elegant fixed downlight designed specifically for the most demanding architecture applications. Designed for an LED module up to Watts in three formats: Xicato XTM (1mm), Xicato XTM (mm), and Dim to Warm General Features Tested to LM and LM0 Protocols, TM-0 available Hidden integral electronic driver compatible with reverse phase (ELV compatible) dimmers down to % Field interchangeable optics (1-0 ) modify the beam spread distribution Accessory holder accepts up to two size-a LSI filters and accessories Integral dimmer available Finishes: LSI Black, White, and Silver Fixture weight: lbs All modules are field replaceable Xicato XTM Module Extremely tight color consistency (less than MacAdam Ellipses) System efficiency up to lumens/watt Backed by Xicato s Five Year Color Consistency and Lumen Maintenance Warranty 0,000 hour life to 0% lumen output, L0 at F max ambient Choice of color temperature Color Rendering Index (CRI) of either (high) or (standard) Color Fidelity (Rf) (high) or (standard) Gamut Area Index (Rg) (high) or 1 (standard) Choice of lumen outputs (delivered lumens) Dim to Warm Module Natural dimming that approximates the black body curve System efficiency up to lumens/watt,000 hour life to 0% lumen output, L0 at F max ambient Halogen mimicking color from 000 K to 00 K Color Rendering Index (CRI) of min. at all dimming settings Color Fidelity (Rf) Gamut Area Index (Rg) Lumen output: 0 Lumens Proprietary mixing optics for smooth even light MOUNTING OPTIONS Please review the ORDERING INFORMATION section on the next page on how to specify the following: Lumens/CRI/Wattage Color Temperature Optic - mm/beam spread LX0-XXXXX-XXXXXX-00-XXXXXX Lexan fitting for 1 and circuit LSI track. With On/Off switch. LX0-XXXXX-XXXXXX-00-EDXXXX Lexan fitting for 1 and circuit LSI track. Integral dimmer (for use with ED dimming driver %). LX0-XXXXX-XXXXXX-LT-LTXXXX Lexan fitting with LumenTalk dimmer (for use with LT dimming driver ( 1%). LX0-XXXXX-XXXXXX-G-XXXXXX Universal fitting for Unistrut Systems and any screw or bolt-up applications. With switch, -foot -wire grounding cord and NEMA -1P plug. /1 1/ /1 LX0-XXXXX-XXXXXX-G-XXXXXX C-clamp for pipes from / to O.D. With switch, -foot -wire grounding cord and NEMA -1P plug. LX0-XXXXX-XXXXXX-A-XXXXXX Canopy for permanent mounting on standard octagonal junction boxes. Other Options (Consult Factory): Stems, specify length ( - 1 ) Custom color, RAL palette Security/Worklite Fixture, use EF as mounting option (track mount only) /1 /1 1/1 1mm ORDERING INFORMATION Xicato XTM 1mm Fixture /1 mm /1 mm /1 mm 1/1 mm /1 mm /1 1mm 1. Choose the desired (T1) for XTM (1mm). Choose the numeric code to designate the desired LED Rating Lumens/CRI/Wattage (-) for 00// (-) for 00// (-) for 00//1 (-) for 00// (-) for 00// (-) for 00//1 (-) for 0// (0-) for 000// (-) for 00//. Choose the numeric code to designate the desired Color Temperature () for 0K (0) for 000K (V) for Vibrant 000K For other CCT, consult factory. Use the following alpha-numeric code to designate the Optic (S1) for 0mm/1 (WR) for 0mm/ (Field Reducer) (M) for 0mm/ (Narrow Field Angle) (M) for 0mm/ (Wide Field Angle) (M) for 0mm/ (Narrow Field Angle) (M) for 0mm/0 (Wide Field Angle) (M) for 0mm/0 /1 mm. Select your Mounting Option (00) Track Fitting (LT) Lumentalk Fitting (G) Unistrut Fitting (G) C-clamp Fitting (A) Canopy Fitting. Choose other fixture Options: Coiled Cord is available only with G and G mounting options. Change G to C and G to C. (When a coiled cord is not specified, a straight cord is provided.). Choose the letter code for Dimming Type: (TE) Trailing Edge (Reverse Phase) (%) (ED) Integral Dimming (%) (00 & A fitting only) (LT) Lumentalk ( 1%) (LT fitting only) () 0-V (%) (A fitting only). Choose the desired Voltage: (0) for 0V () for -V () for V. Choose a Finish for your fixture: Black (B) White (W) Silver (S) Example: LX0 - T1 - S TE 0 B Color Temperature & Center Point Tolerance Color Temp Center Point Tolerance 0K 0K +/- 0K 000K K +/- 0K 00K K +/- 0K 000K 000K +/- 0K Chromaticity Specifications Rg- Gamut LED Ra- CRI Rf- Fidelity Area T1-TS - 1 T1-TS - FIXTURE LED MODULE LED RATING COLOR TEMP OPTIC FITTING DRIVER VOLTAGE FINISH. Don t forget your Accessories! ACCESSORIES Hood SPT A ANG Hood SPT A Backer Ring A Louver Hex A Glass Color Filters A Spread Lens A0, A, A, A Beam Softener A Light Blocking Screens A01S, A0S, A0S Color and Spread Gels A LX-S1-REF-B (0mm/1 ) LX-WRD-REF-CLR (0mm/ ) LX-M-REF-B (0mm/ ) LX-M0-REF-CLR (0mm/ ) LX-M0-REF-B (0mm/ ) LX-M0-REF-CLR (0mm/0 ) LX-M0-REF-CLR (0mm/0 ) Field Reducer Solid State /1 LUMELEX 0 SERIES XICATO XTM 1MM PERFORMANCE The performance characteristics of the LumeLEX family of products can be customized based on the LED module and the optic (reflector) selected. Each available LED module is defined by four characteristics the color rendering index (CRI), the correlated color temperature (CCT), the power that it uses (watts), and its available lumens. Note that available lumens is a theoretical value that represents the light output of the module on its own no fixture or optic attached. In the LSI part number, the LED module is specified with a letter and a number that immediately follow the product series number. For example, in the part number LX0-T0-S1-00-TE0B, the T0- represents an LED module with an output of 00 lumens, a CRI of, a power usage of watts and a color temperature of 0K. The available optics (reflectors) are characterized by size, beam angle, and in some cases the characteristics of the field angle (narrow or wide). The optic is specified by the two characters that follow the LED designation in the part number. For example, the S1 in T0-S1-00- TE0B is a 0mm diameter optic that has a 1-Degree beam with a narrow field. Additional parameters, such as Center Beam Candle Power (CBCP), Delivered Lumens, and Efficiency (Lumens per Watt) are all shown in a table that is organized by LED module and optic combination. CBCP = Center Beam Candle Power Lumens/CRI/Wattage S1 M WR M M M M 00// // //1 1 00// 1 00// // // // // 1 0 Delivered Lumens Lumens/CRI/Wattage S1 M WR M M M M 00// // // // // // // // // Efficiency = Lumens Per Watt Lumens/CRI/Wattage S1 M WR M M M M 00// // 1 00//1 1 00// // 1 00// // // // 1 Absolute range of values are +/- % of typical value, and are for all color temperatures Lumens/CRI/Wattage 00// 00// 00//1 00// 00// 00//1 0// 000// 00// Letter Code Nominal Fixture Power (+/- %), Watts 1 1 Maximum Inrush Current Amps Minimum Power Factor Inrush current is instantaneous current drawn by the LED only when fixture is initially powered on or instantaneously changed from full dim to full bright. For more details see Dimming Application Sheet, IS-0. /1 LUMELEX 0 SERIES XICATO XTM 1MM OPTICS 1/ (mm) 1/1 (mm) LX-S1-REF-B (S1) (0mm/1 ) Anti-reflective coated aspheric lens. Tool-less, twist and Black finish. 1 1/1 (mm) / (0mm) LX-M0-REF-B (M) (0mm/ ) (Narrow Field Angle) Computer designed polycarbonate specular optic. Tool-less, twist and Black finish. 1 / (mm) / (0mm) LX-M-REF-B (M) (0mm/ ) (Narrow Field Angle) Computer designed polycarbonate lens. Tool-less, twist and Black finish. 1 / (mm) / (0mm) LX-M0-REF-CLR (M) (0mm/0 ) (Wide Field Angle) Computer designed polycarbonate specular optic. Tool-less, twist and 1 / (mm) / (0mm) LX-M0-REF-CLR (M) (0mm/ ) (Wide Field Angle) Computer designed polycarbonate specular optic. Tool-less, twist and 1 / (mm) / (0mm) LX-M0-REF-CLR (M) (0mm/0 ) Computer designed polycarbonate specular optic. Tool-less, twist and (mm) LX-WRD-REF-CLR (WR) (0mm/ ) Field reducer. Proprietary field reducing baffle. / (0mm) Solid State /1 LUMELEX 0 SERIES XICATO XTM 1MM PHOTOMETRIC DATA LED RATING: - S1-0mm DIA Optic Beam Spread (minimum) 1 Center Beam Candlepower CRI M- 0mm DIA Optic (NFA: Narrow Field Angle) Beam Spread (minimum) Center Beam Candlepower CRI WR- 0mm DIA Optic (FR: Field Reducer) Beam Spread (minimum) Center Beam Candlepower CRI M- 0mm DIA Optic (NFA: Narrow Field Angle) Beam Spread (minimum) Center Beam Candlepower CRI M- 0mm DIA Optic (NFA: Narrow Field Angle) Beam Spread (minimum) 0 Center Beam Candlepower CRI M- 0mm DIA Optic (WFA: Wide Field Angle) Beam Spread (minimum) 0 Center Beam Candlepower CRI M- 0mm DIA Optic (WFA: Wide Field Angle) Beam Spread (minimum) Center Beam Candlepower 1 CRI LED RATING: - S1-0mm DIA Optic Beam Spread (minimum) 1 Center Beam Candlepower 00 CRI M- 0mm DIA Optic (NFA: Narrow Field Angle) Beam Spread (minimum) Center Beam Candlepower CRI WR- 0mm DIA Optic (FR: Field Reducer) Beam Spread (minimum) Center Beam Candlepower CRI M- 0mm DIA Optic (NFA: Narrow Field Angle) Beam Spread (minimum) Center Beam Candlepower 01 CRI M- 0mm DIA Optic (NFA: Narrow Field Angle) Beam Spread (minimum) 0 Center Beam Candlepower 1 CRI M- 0mm DIA Optic (WFA: Wide Field Angle) Beam Spread (minimum) 0 Center Beam Candlepower 0 CRI M- 0mm DIA Optic (WFA: Wide Field Angle) Beam Spread (minimum) Center Beam Candlepower 0 CRI LED RATING: - M (0 ) NFA 1 1 All Max. Footcandles at 0 Beam Axis LED RATING: - All Max. Footcandles at 0 Beam Axis M (0 ) NFA M (0 ) WFA 0 1 M (0 ) WFA M ( ) NFA M ( ) WFA WR ( ) FR M ( ) NFA All Distances in Feet 0 Photometric Data based on LED Rating: - (00 Lumens/CRI/watts) *WFA Optics not represented in graph M ( ) NFA M ( ) WFA WR ( ) FR M ( ) NFA S1 (1 ) S1 (1 ) All Distances in Feet Photometric Data based on LED Rating: - (00 Lumens/CRI/watts) *WFA Optics not represented in graph /1 1/1 1mm ORDERING INFORMATION Xicato XTM mm Fixture /1 mm /1 mm /1 mm 1/1 mm /1 mm /1 1mm 1. Choose the desired (TS) for XTM (mm). Choose the numeric code to designate the desired LED Rating Lumens/CRI/Wattage (0-) for 00// (0-) for 00//1 (0-) for 00// (-) for 00// (-) for 00// (-) for 00//. Choose the code to designate the desired Color Temperature () for 0K (0) for 000K (V) for Vibrant 000K For other CCT, consult factory. Use the following alpha-numeric code to designate the Optic (N1) for 0mm/ (NR) for 0mm/ (Field Reducer) (N) for 0mm/ (N) for 0mm/0 (N) for 0mm/0. Select your Mounting Option (00) Track Fitting (LT) Lumentalk Fitting (G) Unistrut Fitting (G) C-clamp Fitting (A) Canopy Fitting /1 mm. Choose other fixture Options: Coiled Cord is available only with G and G mounting options. Change G to C and G to C. (When a coiled cord is not specified, a straight cord is provided.). Choose the letter code for Dimming Type: (TE) Trailing Edge (Reverse Phase) (%) (ED) Integral Dimming (%) (00 & A fitting only) (LT) Lumentalk ( 1%) (LT fitting only) () 0-V (%) (A fitting only). Choose the desired Voltage: (0) for 0V () for -V () for V. Choose a Finish for your fixture: Black (B) White (W) Silver (S) Example: LX0 - TS - N TE 0 B FIXTURE LED MODULE LED RATING COLOR TEMP OPTIC FITTING DRIVER VOLTAGE FINISH Color Temperature & Center Point Tolerance. Don t forget your Accessories! Color Temp Center Point Tolerance 0K 0K +/- 0K 000K K +/- 0K 00K K +/- 0K 000K 000K +/- 0K Chromaticity Specifications Rg- Gamut LED Ra- CRI Rf- Fidelity Area T1-TS - 1 T1-TS - ACCESSORIES Hood SPT A ANG Hood SPT A Backer Ring A Louver Hex A Glass Color Filters A Spread Lens A0, A, A, A Beam Softener A Light Blocking Screens A01S, A0S, A0S Color and Spread Gels A LX-N-REF-CLR (0mm/ ) LX-NRD-REF-CLR (0mm/ ) Field Reducer LX-N-REF-CLR (0mm/ ) LX-N0-REF-CLR (0mm/0 ) LX-N0-REF-CLR (0mm/0 ) Solid State /1 LUMELEX 0 SERIES XICATO XTM MM PERFORMANCE The performance characteristics of the LumeLEX family of products can be customized based on the LED module and the optic (reflector) selected. Each available LED module is defined by four characteristics the color rendering index (CRI), the correlated color temperature (CCT), the power that it uses (watts), and its available lumens. Note that available lumens is a theoretical value that represents the light output of the module on its own no fixture or optic attached. In the LSI part number, the LED module is specified with a letter and a number that immediately follow the product series number. For example, in the part number LX0-TS-N1-00-TE0B, the TS- represents an LED module with an output of 00 lumens, a CRI of, a power usage of watts and a color temperature of 0K. The available optics (reflectors) are characterized by size, beam angle, and in some cases the characteristics of the field angle (narrow or wide). The optic is specified by the two characters that follow the LED designation in the part number. For example, the N1 in TS-N1-00- TE0B is a 0mm diameter optic that has a -Degree beam. Additional parameters, such as Center Beam Candle Power (CBCP), Delivered Lumens, and Efficiency (Lumens per Watt) are all shown in a table that is organized by LED module and optic combination. CBCP = Center Beam Candle Power Absolute range of values are +/- % of typical value, and are for all color temperatures Lumens/CRI/Wattage N1 NR N N N 00// 00// // 01 00// // // Delivered Lumens Lumens/CRI/Wattage N1 NR N N N 00// //1 1 00// 1 00// // // Efficiency = Lumens Per Watt Lumens/CRI/Wattage N1 NR N N N 00// 1 00//1 1 00// 00// // // 1 Lumens/CRI/Wattage 00// 00//1 00// 00// 00// 00// Letter Code Nominal Fixture Power (+/- %), Watts 1 Maximum Inrush Current Amps Minimum Power Factor Inrush current is instantaneous current drawn by the LED only when fixture is initially powered on or instantaneously changed from full dim to full bright. For more details see Dimming Application Sheet, IS-0. /1 LUMELEX 0 SERIES XICATO XTM MM OPTICS 1 / (mm) LX-N-REF-CLR (N1) (0mm/ ) Faceted reflectively coated metal optic. Tool-less twist and (mm) LX-NRD-REF-CLR (NR) (0mm/ ) Field reducer. Proprietary field reducing baffle. / (0mm) / (0mm) 1 / (mm) LX-N-REF-CLR (N) (0mm/ ) Faceted reflectively coated metal optic. Tool-less twist and 1 / (mm) LX-N0-REF-CLR (N) (0mm/0 ) Faceted reflectively coated metal optic. Tool-less twist and / (0mm) / (0mm) 1 / (mm) LX-N0-REF-CLR (N) (0mm/0 ) Faceted reflectively coated metal optic. Tool-less twist and / (0mm) Solid State /1 LUMELEX 0 SERIES XICATO XTM MM PHOTOMETRIC DATA LED RATING: - N1-0mm DIA Optic Beam Spread (minimum) Center Beam Candlepower 00 CRI NR- 0mm DIA Optic (FR: Field Reducer) Beam Spread (minimum) Center Beam Candlepower 0 CRI N- 0mm DIA Optic Beam Spread (minimum) Center Beam Candlepower CRI N- 0mm DIA Optic Beam Spread (minimum) 0 Center Beam Candlepower CRI N- 0mm DIA Optic Beam Spread (minimum) 0 Center Beam Candlepower CRI LED RATING: - N1-0mm DIA Optic Beam Spread (minimum) Center Beam Candlepower 000 CRI NR- 0mm DIA Optic (FR: Field Reducer) Beam Spread (minimum) Center Beam Candlepower 1000 CRI N- 0mm DIA Optic Beam Spread (minimum) Center Beam Candlepower 00 CRI N- 0mm DIA Optic Beam Spread (minimum) 0 Center Beam Candlepower 00 CRI N- 0mm DIA Optic Beam Spread (minimum) Center Beam Candlepower 0 CRI All Max. Footcandles at 0 Beam Axis All Max. Footcandles at 0 Beam Axis LED RATING: - N (0 ) 0 1 LED RATING: - N (0 ) N ( ) NR ( ) FR N1 ( ) All Distances in Feet 0 Photometric Data based on LED Rating: - (00 Lumens/CRI/watts) N (0 ) N (0 ) N ( ) NR ( ) FR N1 ( ) All Distances in Feet Photometric Data based on LED Rating: - (00 Lumens/CRI/watts) /1 1/1 1mm ORDERING INFORMATION Dim to Warm Fixture /1 mm /1 mm /1 mm 1/1 mm /1 mm /1 1mm 1. Choose the desired (D1) for Dim to Warm (1mm). Choose the numeric code to designate the desired LED Rating Lumens/CRI/Wattage (-) for 0//. Choose the code to designate the desired Color Temperature (DW) for 000K to 00K. Use the following alpha-numeric code to designate the Optic (W) for mm/ (W) for mm/0 (W) for mm/0 (W) for mm/0 (WR) for 0mm/ (Field Reducer). Select your Mounting Option (00) Track Fitting (LT) Lumentalk Fitting (G) Unistrut Fitting (G) C-clamp Fitting (A) Canopy Fitting. Choose other fixture Options: Coiled Cord is available only with G and G mounting options. Change G to C and G to C. (When a coiled cord is not specified, a straight cord is provided.) /1 mm. Choose the letter code for Dimming Type: (TE) Trailing Edge (Reverse Phase) (%) (ED) Integral Dimming (%) (00 & A fitting only) (LT) Lumentalk ( 1%) (LT fitting only) () 0-V (%) (A fitting only). Choose the desired Voltage: (0) for 0V () for -V () for V. Choose a Finish for your fixture: Black (B) White (W) Silver (S) Example: LX0 - D1 - DW W -00- TE 0 B FIXTURE LED MODULE LED RATING COLOR TEMP OPTIC FITTING DRIVER VOLTAGE FINISH. Don t forget your Accessories! Chromaticity Specifications Rg- Gamut LED Ra- CRI Rf- Fidelity Area D1 ACCESSORIES ANG Hood IN A Hood IN A Glass Color Filters A Color and Spread Gels A Backer Ring AB Louver Hex A Beam Softener A Lighting Blocking Screens A01S, A0S, A0S Spread Lenses A0,A, A, A LX-W-REF-CLR (mm/ ) LX-W0-REF-CLR (mm/0 ) LX-W0-REF-CLR (mm/0 ) LX-W0-REF-CLR (mm/0 ) LX-WRD-REF-CLR (0mm/ ) Field Reducer Solid State /1 LUMELEX 0 SERIES DIM TO WARM PERFORMANCE The performance characteristics of the Dim to Warm LumeLEX family of products can be customized based on the optic (reflector) selected. The behavior of the Dim to Warm modules links the color of the light to the dimmed output of the fixture just like a halogen or incandescent source. Therefore the four characteristics defining the color the color rendering index (CRI), the correlated color temperature (CCT) range, the power that it uses (watts), and its available lumens are linked to the dim setting. Note that available lumens is a theoretical value that represents the light output of the module on its own no fixture or optic attached. Also note that the CRI of this fixture is a minimum of at any dimming setting. In the LSI part number, the LED module is specified with a letter and a number that immediately follow the product series number. For example, in the part number LX0-D-DWW-00-TE0B, the D-DW represents a Dim to Warm LED module with an output of 0 lumens, a CRI of, a power usage of watts and a color temperature range of 000K 00K that is tied to the dimming setting. The available optics (reflectors) are characterized by size, beam angle, and in some cases the characteristics of the field angle (narrow or wide). The optic is specified by the two characters that follow the LED designation in the part number. For example, the W in LX0-D-DWW-00-TE0B is a 0mm diameter optic that has a -Degree beam. Additional parameters, such as Center Beam Candle Power (CBCP), Delivered Lumens, and Efficiency (Lumens per Watt) are all shown in a table that is organized by LED module and optic combination. CBCP = Center Beam Candle Power Absolute range of values are +/- % of typical value, and are for all color temperatures Lumens/CRI/Wattage W WR W W W 0// 0 0 Delivered Lumens Lumens/CRI/Wattage W WR W W W 0// Efficiency = Lumens Per Watt Lumens/CRI/Wattage W WR W W W 0// 1 1 Lumens/CRI/Wattage 0// SKU Code - Nominal Fixture Power (+/- %), Watts Maximum Inrush Current Amps Minimum Power Factor 0. Inrush current is instantaneous current drawn by the LED only when fixture is initially powered on or instantaneously changed from full dim to full bright. For more details see Dimming Application Sheet, IS-0. /1 LUMELEX 0 SERIES DIM TO WARM OPTICS 1 /1 (mm) LX-W-REF-CLR (W) (mm/ ) Faceted reflectively coated metal optic. Tool-less twist and (mm) LX-WRD-REF-CLR (WR) (0mm/ ) Field reducer. Proprietary field reducing baffle. / (0mm) / (0mm) 1 /1 (mm) / (0mm) LX-W0-REF-CLR (W) (mm/0 ) Faceted reflectively coated metal optic. Tool-less twist and 1 /1 (mm) / (0mm) LX-W0-REF-CLR (W) (mm/0 ) Faceted reflectively coated metal optic. Tool-less twist and 1 /1 (mm) LX-W0-REF-CLR (W) (mm/0 ) Faceted reflectively coated metal optic. Tool-less twist and / (0mm) Solid State /1 LUMELEX 0 SERIES DIM TO WARM PHOTOMETRIC DATA LED RATING: - W-mm DIA Optic Beam Spread (minimum) Center Beam Candlepower CRI WR-0mm DIA Optic Beam Spread (minimum) (FR: Field Reducer) Center Beam Candlepower 0 CRI W-mm DIA Optic Beam Spread (minimum) 0 Center Beam Candlepower 0 C
Advertisements
We Need Your Support
Thank you for visiting our website and your interest in our free products and services. We are nonprofit website to share and download documents. To the running of this website, we need your help to support us.

Thanks to everyone for your continued support.

No, Thanks
SAVE OUR EARTH

We need your sign to support Project to invent "SMART AND CONTROLLABLE REFLECTIVE BALLOONS" to cover the Sun and Save Our Earth.

More details...

Sign Now!

We are very appreciated for your Prompt Action!

x