3D Computer-Aided Drawing Final Project Sem 1-2010 - Utech | Computer Aided Design | Door

Pages 8
Views 6

Please download to get full document.

View again

of 8
All materials on our website are shared by users. If you have any questions about copyright issues, please report us to resolve them. We are always happy to assist you.
Description
1 UNIVERSITY OF TECHNOLOGY, JAMAICA SCHOOL OF BUILDING AND LAND MANAGEMENT (CONSTRUCTION PROGRAMMES) COURSE: TOPIC: SEMESTER: ASSIGNED DATE: Computer Aided Drafting (AutoCADD2) 3D AutoCAD Final Project 1 Week of November 14, 2010 DUE DATE: December 14, 2010 RECOMMENDED PROCEDURE (In Metric) Layer Creation 1. Create the appropriate layers for the drawing shown in Figure 12. (5 marks) Creating Building Walls 2. Draw the floor plan as shown in Figure 1 in millimeter (convert to metric - Conv
Transcript
    UTECH-SBLM.AutoCADD2-3DFP-1.0 Computer Aided Design & Drafting 2 1 | Page   1 UNIVERSITY OF TECHNOLOGY, JAMAICA SCHOOL OF BUILDING AND LAND MANAGEMENT(CONSTRUCTION PROGRAMMES)COURSE: Computer Aided Drafting (AutoCADD2)3D AutoCAD Final Project   ASSIGNED DATE: Week of   November 14, 2010DUE DATE: December 14, 2010   RECOMMENDED PROCEDURE (In Metric)     Layer Creation     1. Create the appropriate layers for the drawing shown in Figure 12. (5 marks)   Creating Building Walls     2. Draw the floor plan as shown in Figure 1 in millimeter (convert to metric - Conversion factor - 300 mm = 1’)   (20 marks)   3. Extrude regions 4800 mm high (converted from 8' + 8' = 16'). Creating Doors and Windows Openings     4. Create the door and window spaces as shown in Figure 2, Figure 3 and Figure 5 (in mm)   with the use of the UCS,BOX, CYLINDER etc. commands. (15 marks)  5. Subtract the inner solids from the exterior solids - walls (DO1, WO1, and WO2 and the combination of the boxand the cylinder, DO2, to create the doors and windows openings from the building as shown in Figure 5. (28 marks) TOPIC:   SEMESTER:   (5 marks) 1    UTECH-SBLM.AutoCADD2-3DFP-1.0 Computer Aided Design & Drafting 2 2 | Page   2  6. Switch to the front view and draw pline shown in hidden lines in Figure 4. (12 marks) 7. Extrude pline (polyline) 9300 mm (check top view to ensure solid lines up with the building). (5 marks)  8. Subtract solids from the walls to create the sloping top of the building. (5 marks)   Creating and Inserting Door and Window Symbols (Blocks)     9. Create 3D door and windows as on Page 6 (Figures 6, 7, 8, 9 and 10) using various views (2D and 3D views) androtate the glass (blades) at an angle. [Design can be modified slightly] (30 marks)  10. Create a door knob on the door at an appropriate location on the door. (5 marks)  11. Convert objects (door and windows) to blocks with insertion points (base point) being at the lower left corner. (12 marks)  12. Insert blocks such as (door and windows) into the openings and furniture in the building. (28 marks)   Creating the Roof     13. Create a ridge rafter (50 mm wide x 200 mm high x 9900 mm long) on the top of the building. (5 marks)  14. Create common rafters (50 mm x 150 mm) at 600 O/C with 450 mm overhang. (15 marks)  15. Created a gable roof (Roof Covering of your Choice) with 450 mm overhang on (above) the common rafters. (10 marks)   Creating the Floor     16. Create a 100mm slab floor as shown in Figure 11. (5 marks)    UTECH-SBLM.AutoCADD2-3DFP-1.0 Computer Aided Design & Drafting 2 3 | Page   3 Creating the Property   17. Create a level property using (3D Face command or Planar surface) with size of your choice for the building to belocated on as shown in Figure 12. (5 marks)  18. Create TWO (2) trees at any location on the property at distances of your choice on the property (away fromthe house). (5 marks)  19. Create a fence (block), design of your choice, and place it around the property. (20 marks)   Rendering the Drawing   20. Create two external views with appropriate backgrounds and name them SCENE 1 & 2. Apply TWO (2) lightsources, to each scene (day and night scene) at locations of your choice to the building with shadow on. Createtwo camera views of the inside of the building with lights and name them SCENE 3 & 4. (24 marks)  21. Apply different materials to various parts of the completed building and property (walls, floor, rafters, roof, doors,window frame and glass, fence, etc.) (20 marks)   Save File  22. eTransmit the file and name the zipped folder [your name 3D Final Project] and add the rendered image of thedrawing in the folder. (11 marks)   Soft copy of project should be uploaded to the Moodle site by the due date. * No late final Project will be  accepted  . Total Marks: 290N.B. All external materials used must be added inside folder.    UTECH-SBLM.AutoCADD2-3DFP-1.0 Computer Aided Design & Drafting 2 4 | Page   4
We Need Your Support
Thank you for visiting our website and your interest in our free products and services. We are nonprofit website to share and download documents. To the running of this website, we need your help to support us.

Thanks to everyone for your continued support.

No, Thanks
SAVE OUR EARTH

We need your sign to support Project to invent "SMART AND CONTROLLABLE REFLECTIVE BALLOONS" to cover the Sun and Save Our Earth.

More details...

Sign Now!

We are very appreciated for your Prompt Action!

x